Fork Mounted Work Platforms

Platform Requirements

There are particular requirements outlining lift truck safety requirements and the work platform has to be constructed by the maker in order to conform. A customized designed work platform can be built by a licensed engineer as long as it also satisfies the design criteria according to the applicable forklift safety standard. These custom designed platforms ought to be certified by a licensed engineer to maintain they have in actuality been made according to the engineers design and have followed all standards. The work platform needs to be legibly marked to show the name of the certifying engineer or the producer.

There is several certain information's that are needed to be make on the machine. One instance for customized machine is that these need a unique code or identification number linking the certification and design documentation from the engineer. When the platform is a manufactured design, the serial or part number to allow the design of the work platform ought to be marked in able to be linked to the manufacturer's documentation. The weight of the work platform while empty, in addition to the safety requirements which the work platform was built to meet is amongst other vital markings.

The utmost combined weight of the equipment, individuals and materials allowed on the work platform is called the rated load. This particular information must also be legibly marked on the work platform. Noting the minimum rated capacity of the forklift which is needed so as to safely handle the work platform could be determined by specifying the minimum wheel track and lift truck capacity or by the model and make of the forklift which could be utilized with the platform. The process for connecting the work platform to the forks or fork carriage must likewise be specified by a professional engineer or the producer.

Another requirement meant for safety guarantees the flooring of the work platform has an anti-slip surface positioned not farther than 8 inches above the standard load supporting area of the blades. There should be a means given to be able to prevent the work platform and carriage from pivoting and turning.

Use Requirements

The lift truck has to be utilized by a skilled operator who is authorized by the employer so as to utilize the machine for raising personnel in the work platform. The work platform and the lift truck should both be in compliance with OHSR and in good condition prior to the use of the system to raise personnel. All manufacturer or designer instructions that pertain to safe operation of the work platform should likewise be available in the workplace. If the carriage of the lift truck is capable of pivoting or revolving, these functions ought to be disabled to maintain safety. The work platform should be locked to the fork carriage or to the forks in the particular way provided by the work platform maker or a licensed engineer.

Various safety ensuring standards state that the weight of the work platform together with the maximum rated load for the work platform must not go over one third of the rated capacity of a rough terrain lift truck or one half the rated capability of a high lift truck for the reach and configuration being used. A trial lift is considered necessary to be performed at each task site instantly previous to hoisting personnel in the work platform. This process ensures the forklift and be placed and maintained on a proper supporting surface and likewise to be able to ensure there is adequate reach to put the work platform to allow the task to be completed. The trial process even checks that the mast is vertical or that the boom can travel vertically.

Prior to using a work platform a test lift must be done immediately before raising staff to ensure the lift can be properly situated on an appropriate supporting surface, there is enough reach to position the work platform to do the required job, and the vertical mast could travel vertically. Utilizing the tilt function for the mast can be used in order to assist with final positioning at the job location and the mast has to travel in a vertical plane. The trial lift determines that sufficient clearance could be maintained between the work platform and the elevating mechanism of the lift truck. Clearance is likewise checked in accordance with overhead obstructions, scaffolding, storage racks, and whichever nearby structures, as well from hazards such as energized equipment and live electrical wire.

Systems of communication have to be implemented between the lift truck operator and the work platform occupants to be able to efficiently and safely manage operations of the work platform. If there are multiple occupants on the work platform, one person should be selected to be the primary individual accountable to signal the lift truck driver with work platform motion requests. A system of arm and hand signals need to be established as an alternative method of communication in case the primary electronic or voice means becomes disabled during work platform operations.

Safety standards dictate that personnel should not be transported in the work platform between task sites and the platform needs to be lowered to grade or floor level before any individual goes in or exits the platform as well. If the work platform does not have railing or sufficient protection on all sides, each occupant ought to put on an appropriate fall protection system connected to a selected anchor point on the work platform. Staff must perform functions from the platform surface. It is strictly prohibited they do not stand on the guardrails or make use of whatever mechanism in order to add to the working height on the work platform.

Lastly, the lift truck driver has to remain within 10 feet or 3 metres of the forklift controls and maintain visual contact with the work platform and with the lift truck. Whenever the forklift platform is occupied the driver must abide by the above requirements and remain in contact with the work platform occupants. These information help to maintain workplace safety for everyone.

Click to Download the pdf



Forklift Masts and Parts

  • Alternators
    An alternator is a device that changes mechanical energy into electric energy. This is done in the form of an electrical current. In essence, an AC electrical generator could likewise be called an alternator. The word usually refers to a small, ...
    More
  • Brakes
    A brake wherein the friction is supplied by a set of brake shoes or brake pads that press against a rotating drum unit called a brake drum. There are a few particular differences among brake drum kinds. A "brake drum" is commonly the definition ...
    More
  • Carriage Rollers
    Particularly designed bearings known as carriage rollers are frequently seen on lift masts because they allow them to function better within tough environmental surroundings. The typical lift mast is regularly subject to frequent oscillations, ...
    More
  • Carriages and Carriage Parts
    Rated by the tine carriage hoisting capacity, there are actually four sizes of hook type blade carriages. The hook type tine carriages have been standardized. Class I carriages are rated for cargo as much as 2000 lbs. The carriage bar spacing ...
    More
  • Control Valves
    The earliest mechanized control systems were being used more that two thousand years ago. In Alexandria Egypt, the ancient Ktesibios water clock constructed in the 3rd century is considered to be the first feedback control device on record. This ...
    More
  • Controllers
    Forklifts are available in a wide range of load capacities and various models. The majority of lift trucks in a typical warehouse setting have load capacities between 1-5 tons. Larger scale units are utilized for heavier loads, like for instance ...
    More
  • Differentials
    A mechanical machine capable of transmitting torque and rotation via three shafts is called a differential. Every now and then but not all the time the differential will employ gears and will function in two ways: in automobiles, it receives one ...
    More
  • Drive Axles
    The piece of equipment that is elastically fastened to the frame of the vehicle utilizing a lift mast is known as the lift truck drive axle. The lift mast affixes to the drive axle and could be inclined, by no less than one tilting cylinder, ...
    More

Lift Parts Express

Our professional team is ready to provide you with all the support you need. Great prices and fast delivery times is what you will come to expect from us. Call us today at:

TOLL FREE: 1-888-695-7994


www.forkliftmasts.com

Email Us



Lift Parts Express prides itself on the diversity and volume of parts we carry. Regardless of the model of lift truck you run, we have the parts you need. The cost savings we can offer will...   About Us