Industrial Jibs

The lift truck jib would enable a worker to shift their heavy heaps overtop of obstructions or obstacles on roofs, raised platforms, or decks. They can be utilized so as to reach the second and third level building platforms so as to move or pick up loads at places which are still under construction. Fork truck jibs are really utilized to be able to deliver trucks and flatbed trailers, to suspend trusses and laminate wood. Jibs are also usually used for reaching over scaffolding for masonry work.

Every forklift jib attachment is equipped with two swivel hooks. One of the hooks could be manually connected on the underside of the boom at whichever position whereas the other hook remains fixed at the end of the jib. This permits the individual operating it to be able to lift stuff that have two hook points. Depending on the size of the model, each hook is rated at either 4000 or 6000 pounds It is possible to utilize either a hook or even two to carry a load. The operator needs to make certain that the overall weight of the jib and the load does not exceed the rated capacity of the jib as shown on the load chart for that retracted or extended position.

Attachments jibs can be used on extendable-reach lift trucks, rough terrain straight-mast forklifts or even on industrial forklifts. The forklift jib cranes could be fitted onto the forklift through inserting both of the forks into the fork pockets. The rear of the jib crane then seats against the back of the fork and a security chain wraps the forklift carriage to hold it into position.

Jib Boom Forklift Attachment Load Capacity

The load capacity of a forklift jib has a most of roughly 1935 lbs up to 6000 pounds on either the extended or retracted positions range. You might need to discuss with a material handling specialist concerning the specific limits of your lift truck application. The load capacity ratings are really intended for the jib itself and not the lift truck or the utmost load which could be lifted securely with a certain forklift. It is very important keep in mind that at any time when whichever accessories like for example a forklift jib are attached to the lift truck, the new center of gravity made by the accessory would reduce the overall lift capacity of the forklift. There are guidelines obtainable which offer information on how to accurately gauge these load limits.

Safe Usage of your Fork Lift Attachment & Fork Trucks

Prior to using a lift truck jib, make certain that it is properly secured to the forklift utilizing hooks and shackles. Continuously be sure so as to verify that the screw pins are tight. It is essential to also be sure that the weight calculations have been done properly. Remember to consider the truth that rated capacities at times decrease when the boom is in a raised position, whenever the boom is fully extended with telehandlers or each time the mast is slanted forward.

Some vital suggestions concerning the adjustable jib are: never pull a load making use of a forklift jib accessory, since these kinds of accessories are meant for vertical lift only. All the time pick up the load without letting it move to and fro. Use extreme caution each time a load is carried to prevent tipping over the truck.

Click to Download the pdf



Forklift Masts and Parts

  • Alternators
    An alternator is a device that changes mechanical energy into electric energy. This is done in the form of an electrical current. In essence, an AC electrical generator could likewise be called an alternator. The word usually refers to a small, ...
    More
  • Brakes
    A brake wherein the friction is supplied by a set of brake shoes or brake pads that press against a rotating drum unit called a brake drum. There are a few particular differences among brake drum kinds. A "brake drum" is commonly the definition ...
    More
  • Carriage Rollers
    Particularly designed bearings known as carriage rollers are frequently seen on lift masts because they allow them to function better within tough environmental surroundings. The typical lift mast is regularly subject to frequent oscillations, ...
    More
  • Carriages and Carriage Parts
    Rated by the tine carriage hoisting capacity, there are actually four sizes of hook type blade carriages. The hook type tine carriages have been standardized. Class I carriages are rated for cargo as much as 2000 lbs. The carriage bar spacing ...
    More
  • Control Valves
    The earliest mechanized control systems were being used more that two thousand years ago. In Alexandria Egypt, the ancient Ktesibios water clock constructed in the 3rd century is considered to be the first feedback control device on record. This ...
    More
  • Controllers
    Forklifts are available in a wide range of load capacities and various models. The majority of lift trucks in a typical warehouse setting have load capacities between 1-5 tons. Larger scale units are utilized for heavier loads, like for instance ...
    More
  • Differentials
    A mechanical machine capable of transmitting torque and rotation via three shafts is called a differential. Every now and then but not all the time the differential will employ gears and will function in two ways: in automobiles, it receives one ...
    More
  • Drive Axles
    The piece of equipment that is elastically fastened to the frame of the vehicle utilizing a lift mast is known as the lift truck drive axle. The lift mast affixes to the drive axle and could be inclined, by no less than one tilting cylinder, ...
    More

Lift Parts Express

Our professional team is ready to provide you with all the support you need. Great prices and fast delivery times is what you will come to expect from us. Call us today at:

TOLL FREE: 1-888-695-7994


www.forkliftmasts.com

Email Us



Lift Parts Express prides itself on the diversity and volume of parts we carry. Regardless of the model of lift truck you run, we have the parts you need. The cost savings we can offer will...   About Us