Hyster

In order to help avoid the need for expensive forklift repairs, it is suggested to check the front end of your forklift regularly as part of your pre-shift and even daily inspection. By catching any problems as they happen or ahead of time, you can also help prevent damage to any kind of loads too. The following includes some of the general guidelines on what particular stuff to inspect during regular inspections of your material handling fleet.

Forks
It is essential to frequently inspect the forks because if they are cracked or worn out, they could potentially fail without warning. Any type of fork damage means that your forklift must immediately be removed from service until it is fixed and safe once more. Visually inspect your forks for any noticeable indications of damage or wear. If the cracks run deeper than on the surface, replace them. Any type of wear on the forks beyond 10 percent is another indication that you must replace the forks.

Mast
The mast should ideally tilt backward and forward while being able to move down and up. You might need to grease the mast strip sliding surfaces and fittings if you find that the sliding surfaces are binding. On the inner mast there is a fitting located on every side. The lift bracket side rollers are a different lubrication point and there is also one on every side roller. When the lubricating has been done, lower and raise the mast and also tilt it backward and forward a few times in order to make sure that the lubricant is worked correctly into the fittings.

Tilt Cylinders
Uncontrolled mast movement can be caused by oil leakage; thus, your inspection must involve inspecting for oil leaks and for damage. Whether the leaks are external or are located inside of the cylinder, the end result can be loss of fluid and cylinder drift. If there are any signs of leaks or damage, you might have to replace the whole cylinder assembly, or just the seals.

Chains
The mast chains have to be inspected to see if they are being stretched beyond their acceptable limits. Moreover, inspect the chain wear guage or check the chains for signs of damage. If there is wear beyond 2 percent, replace the chain. Also replace it if the chain appears kinked or rusted. Both the sheave bearings and the chain rollers also have to be inspected for signs of wear.

Usually, mast lift chains wear at the pin-to-link connections. If you notice wear, you can experience chain failure. This can end up damaging the product or front end components. If you do not have time on hand to carry out regular fleet inspections or if you need help determining what exactly to inspect on your lift trucks, simply contact your local lift truck dealer. Their skilled service technicians will help your perform planned maintenance or PM checks according to your application requirements and scheduling.

Click to Download the pdf



Forklift Mast Articles

  • Clark
    The History of the Gas Forklift The Clark Equipment Company made the very first gas powered forklift during the early 20th century. Clark has led the business in gas-powered forklifts ever since that time. Beginning Located in Buchanan, ...
    More
  • Toyota
    Sakichi Toyoda was the first founder of the Toyota Industries Corporation or TICO during nineteen twenty six. TICO has expanded the scope of its business domains since the companies beginning to promote diversification, such as material handling ...
    More
  • Doosan
    Forklift Engines Forklifts are classified as small-engine vehicles, the same category wherein lawnmowers are classed. Forklift engines all follow the principles of internal combustion. Different forklift brand names and models will have varying ...
    More
  • Crown
    The Crown RC 5500 Series was built on a vision that focuses on realistic challenges in the workplace. This innovative model features intelligent technology and best-in-class comfort and ergonomics. Keeping the operator safe and comfortable ...
    More
  • Yale
    Yale produces a great range of Narrow Aisle forklifts which could help to make the most of a companies storage density. Suitable for case picking and pallet handling, these very narrow aisle trucks could utilized in spaces of 16 feet to 55 feet. ...
    More
  • Nissan
    Reach trucks or narrow aisle trucks have always been common as clients continue to decrease their aisle count and floor space requirements, whilst looking for more lift heights. These kinds of machines have a trade-off; the requirement is for ...
    More
  • Komatsu
    Warehouse Forklift Maintenance Forklifts need a proper maintenance program to help increase the machine's lifespan and is an important factor in allowing the equipment to function safely and effectively. Completing regular forklift check ups and ...
    More

Lift Parts Express

Our professional team is ready to provide you with all the support you need. Great prices and fast delivery times is what you will come to expect from us. Call us today at:

TOLL FREE: 1-888-695-7994


www.forkliftmasts.com

Email Us



Lift Parts Express prides itself on the diversity and volume of parts we carry. Regardless of the model of lift truck you run, we have the parts you need. The cost savings we can offer will...   About Us